<![CDATA[So, where could I get Delrin bushings made...]]>Just curious if anyone knows a dude/shop/place who can get me a set of delrin bushings made?

I know a fella on the Audi forum I frequent got a set of four made up for about $100 and I'm looking to spin up about 8-10 for my car, since 4 of the bushings are NLA, and the other ones are bloody expensive, and suck pretty badly anyway.

I will likely spin up a design in Pro-E and get that ready when I find someone who can do it. Also have the parts to test fit them, and I have a press and everything in my shop... So I'd prefer to work with the actual fabricator/machinist if someone knows a guy?

]]>https://fargostreet.com/topic/17997/so-where-could-i-get-delrin-bushings-made...RSS for NodeThu, 28 May 2026 17:16:18 GMTMon, 21 Sep 2009 23:42:28 GMT60<![CDATA[Reply to So, where could I get Delrin bushings made... on Wed, 23 Sep 2009 04:58:14 GMT]]>

Colin;288779 wrote:
If you model it, I can assign a part number and shuffle it through our production line pretty easily, otherwise if a standard heavy lathe will work I could turn some out quickly.

What shop you at? Sorry, I'm new.

I've got a lot of school to catch up on. I can make two of the bushings relatively easy since I have them in my garage. Need to pull both subframes to get all 8 bushings measured out.

I have a template I made and saved in Pro-E today for all of the bushings, so all I have to do is go in and edit the dimensions in inches, and throw them into a standard engineering 3 face layout with an iso view and I'll be set. That could take some time though, as I need to measure every bushing a few times with gauges, and I'm slow.

Looking to do two piece press-fit bushings possibly with a center steel insert. just like this

http://www.justfourrings.com/phpBB2/files/200905132201_063_316.jpg

]]>https://fargostreet.com/post/277290https://fargostreet.com/post/277290Wed, 23 Sep 2009 04:58:14 GMT<![CDATA[Reply to So, where could I get Delrin bushings made... on Tue, 22 Sep 2009 04:38:18 GMT]]>

63vette;288780 wrote:
Reubens the man.

hell ya he is

I think he would try to do anything, and i think he could make anything in that garage of his, haha

hell he machined my little old T04e 57trim to accept a big T04r wheel like nothing... dirt cheap and a hell of a cool guy

]]>https://fargostreet.com/post/277194https://fargostreet.com/post/277194Tue, 22 Sep 2009 04:38:18 GMT<![CDATA[Reply to So, where could I get Delrin bushings made... on Tue, 22 Sep 2009 02:57:13 GMT]]>Reubens the man.

]]>https://fargostreet.com/post/277174https://fargostreet.com/post/277174Tue, 22 Sep 2009 02:57:13 GMT<![CDATA[Reply to So, where could I get Delrin bushings made... on Tue, 22 Sep 2009 02:39:43 GMT]]>If you model it, I can assign a part number and shuffle it through our production line pretty easily, otherwise if a standard heavy lathe will work I could turn some out quickly.

]]>https://fargostreet.com/post/277173https://fargostreet.com/post/277173Tue, 22 Sep 2009 02:39:43 GMT<![CDATA[Reply to So, where could I get Delrin bushings made... on Tue, 22 Sep 2009 01:46:47 GMT]]>if you get something set up let me know. ive been meaning to do this for a llong time now. in fact i was just talking to joel about it last night.. delgrin lol

]]>https://fargostreet.com/post/277172https://fargostreet.com/post/277172Tue, 22 Sep 2009 01:46:47 GMT<![CDATA[Reply to So, where could I get Delrin bushings made... on Tue, 22 Sep 2009 01:45:38 GMT]]>Reubens Machine Inc (Reuben's Machine Inc*)
701 27th St N
Fargo, ND 58102-3130(Fargo-Moorhead, ND-MN Metro Area)

Phone: (701) 293-6120

]]>https://fargostreet.com/post/277171https://fargostreet.com/post/277171Tue, 22 Sep 2009 01:45:38 GMT<![CDATA[Reply to So, where could I get Delrin bushings made... on Tue, 22 Sep 2009 00:52:21 GMT]]>

Joel;288769 wrote:
if you could get a measurement, my Girlfriends grandpa has a manual lathe and he might be able to spin em for you if you could find the chunks of delrin.

Sounds fun. I'll see what I can get done, and when. This is going to be one of those slow-on-the-weekends-in-my-garage
projects, but I can get everything measured with my mic's and get it into pro engineer and go from there. sourcing delrin should be easy as well I figure.

** here's a start. If you check the bottom, they offer 6inch tubes of delrin in various I/D and O/D's. All I need is a Max O.D. and shoot a bit higher than that, and we are good to go I
http://www.mcmaster.com/#delrin-bushings/=3qfv4i

]]>https://fargostreet.com/post/277167https://fargostreet.com/post/277167Tue, 22 Sep 2009 00:52:21 GMT<![CDATA[Reply to So, where could I get Delrin bushings made... on Tue, 22 Sep 2009 00:20:42 GMT]]>if you could get a measurement, my Girlfriends grandpa has a manual lathe and he might be able to spin em for you if you could find the chunks of delrin.

]]>https://fargostreet.com/post/277163https://fargostreet.com/post/277163Tue, 22 Sep 2009 00:20:42 GMT