<![CDATA[Nothing to see here...]]>Matt, Dave, Bill..... You are all going down.....
1000hp 2100lbs. Holler MWB!!!!

legacy image

Hehehe.. Should be a fun summer... Beers on me this year. 🙂

]]>https://fargostreet.com/topic/19098/nothing-to-see-here...RSS for NodeThu, 28 May 2026 14:28:28 GMTFri, 23 Apr 2010 02:49:04 GMT60<![CDATA[Reply to Nothing to see here... on Fri, 24 Sep 2010 20:36:41 GMT]]>legacy image

]]>https://fargostreet.com/post/304211https://fargostreet.com/post/304211Fri, 24 Sep 2010 20:36:41 GMT<![CDATA[Reply to Nothing to see here... on Wed, 08 Sep 2010 13:46:42 GMT]]>

63vette;315583 wrote:
Yep. Done by friday. Have to call andy and see if I can get on dyno Friday or sat and try to make it to isd Sunday.
Whats the scoop with Brummers track>

Might have to race both days (or Sunday instead of Saturday) then.

As for what I know about Brummer's track - I posted it in that thread. Something about this racer's daughter or grand daughter and some connection to Greg and dirt work in progress and hoping to open gates in the spring.

]]>https://fargostreet.com/post/303886https://fargostreet.com/post/303886Wed, 08 Sep 2010 13:46:42 GMT<![CDATA[Reply to Nothing to see here... on Wed, 08 Sep 2010 04:08:34 GMT]]>

dubbsy;315582 wrote:
so Friday, right?

Yep. Done by friday. Have to call andy and see if I can get on dyno Friday or sat and try to make it to isd Sunday.
Whats the scoop with Brummers track>

]]>https://fargostreet.com/post/303879https://fargostreet.com/post/303879Wed, 08 Sep 2010 04:08:34 GMT<![CDATA[Reply to Nothing to see here... on Wed, 08 Sep 2010 03:43:56 GMT]]>so Friday, right?

]]>https://fargostreet.com/post/303878https://fargostreet.com/post/303878Wed, 08 Sep 2010 03:43:56 GMT<![CDATA[Reply to Nothing to see here... on Wed, 08 Sep 2010 02:41:49 GMT]]>Next time stop and have a cold one.

]]>https://fargostreet.com/post/303874https://fargostreet.com/post/303874Wed, 08 Sep 2010 02:41:49 GMT<![CDATA[Reply to Nothing to see here... on Fri, 03 Sep 2010 11:16:27 GMT]]>i have seen you working in your garge on this quite a bit for the last few months.

No im not a stalker, just happen to drive down that street a lot.

]]>https://fargostreet.com/post/303745https://fargostreet.com/post/303745Fri, 03 Sep 2010 11:16:27 GMT<![CDATA[Reply to Nothing to see here... on Sat, 28 Aug 2010 19:35:21 GMT]]>Ive fallen and I cant get up.... Thank god for life alert. 🙂

]]>https://fargostreet.com/post/303572https://fargostreet.com/post/303572Sat, 28 Aug 2010 19:35:21 GMT<![CDATA[Reply to Nothing to see here... on Sat, 28 Aug 2010 19:10:27 GMT]]>

63vette;315252 wrote:
Work is killing me, so I am way behind. I finished the wiring last night but it still needs lexan and paint on the wing & door handles.
I doubt the thing will make it in the 7s anyway. Just stirring up shit.

Put some tennis balls on the legs of your walker so you can move around the garage quicker:icon_joker: Do you need a helping hand?

]]>https://fargostreet.com/post/303571https://fargostreet.com/post/303571Sat, 28 Aug 2010 19:10:27 GMT<![CDATA[Reply to Nothing to see here... on Sat, 28 Aug 2010 17:58:08 GMT]]>Get it done and bring it to the last street legal, I want to see some all motor beastness

]]>https://fargostreet.com/post/303565https://fargostreet.com/post/303565Sat, 28 Aug 2010 17:58:08 GMT<![CDATA[Reply to Nothing to see here... on Sat, 28 Aug 2010 17:19:50 GMT]]>

63vette;315252 wrote:
Work is killing me, so I am way behind. I finished the wiring last night but it still needs lexan and paint on the wing & door handles.
I doubt the thing will make it in the 7s anyway. Just stirring up shit.

Wow Jim, you need a hug or something?

]]>https://fargostreet.com/post/303564https://fargostreet.com/post/303564Sat, 28 Aug 2010 17:19:50 GMT<![CDATA[Reply to Nothing to see here... on Sat, 28 Aug 2010 16:19:11 GMT]]>Work is killing me, so I am way behind. I finished the wiring last night but it still needs lexan and paint on the wing & door handles.
I doubt the thing will make it in the 7s anyway. Just stirring up shit.

]]>https://fargostreet.com/post/303562https://fargostreet.com/post/303562Sat, 28 Aug 2010 16:19:11 GMT<![CDATA[Reply to Nothing to see here... on Sat, 28 Aug 2010 13:53:15 GMT]]>Hey so where the hell is this thing? is it near completion?

]]>https://fargostreet.com/post/303557https://fargostreet.com/post/303557Sat, 28 Aug 2010 13:53:15 GMT<![CDATA[Reply to Nothing to see here... on Thu, 29 Apr 2010 01:27:34 GMT]]>^^^Ouch, thats gonna leave a mark. :bom:

The good thing is, I was just reading about hammertone paint and I guess it makes the shitstains virtually invisible. So unless some slips through the seams of the tinwork and gets on the rear tires, it shouldn't be a problem.

😄

]]>https://fargostreet.com/post/295664https://fargostreet.com/post/295664Thu, 29 Apr 2010 01:27:34 GMT<![CDATA[Reply to Nothing to see here... on Wed, 28 Apr 2010 17:20:29 GMT]]>Jim,

Matt, Dave and I have decided to chip in together and purchase a box of Depends for you. We figured since you must want to keep the interior clean, maybe if you wear these you may actually get a full pass in. Unlike when you weren't wearing them when in the Vette.

]]>https://fargostreet.com/post/295629https://fargostreet.com/post/295629Wed, 28 Apr 2010 17:20:29 GMT<![CDATA[Reply to Nothing to see here... on Wed, 28 Apr 2010 13:27:41 GMT]]>Looks good Jim....hope this one actually goes down the track clean. 😛

]]>https://fargostreet.com/post/295616https://fargostreet.com/post/295616Wed, 28 Apr 2010 13:27:41 GMT<![CDATA[Reply to Nothing to see here... on Mon, 26 Apr 2010 02:50:16 GMT]]>

63vette;307101 wrote:
Its a crate long block. RFD wasnt able to make my heads after 5 months and getting another set by race season wasnt going to happen. Gotta do what you gotta do... Shafiroff, Sunset, Reher Morrison or Quality Engine.. I dont built my own shortblocks..

With the prices I have paid Wayne at Quality for engine assembly I wouldn't even bother with it either!

]]>https://fargostreet.com/post/295480https://fargostreet.com/post/295480Mon, 26 Apr 2010 02:50:16 GMT<![CDATA[Reply to Nothing to see here... on Mon, 26 Apr 2010 02:17:14 GMT]]>Its a crate long block. RFD wasnt able to make my heads after 5 months and getting another set by race season wasnt going to happen. Gotta do what you gotta do... Shafiroff, Sunset, Reher Morrison or Quality Engine.. I dont built my own shortblocks..

]]>https://fargostreet.com/post/295478https://fargostreet.com/post/295478Mon, 26 Apr 2010 02:17:14 GMT<![CDATA[Reply to Nothing to see here... on Mon, 26 Apr 2010 01:01:11 GMT]]>oh its a CRATE engine?

]]>https://fargostreet.com/post/295468https://fargostreet.com/post/295468Mon, 26 Apr 2010 01:01:11 GMT<![CDATA[Reply to Nothing to see here... on Sun, 25 Apr 2010 23:39:29 GMT]]>

63vette;306973 wrote:
Motor is a sbc 434 and made 832hp at 7200 no spray. E98.

does that include the power you gain from the hood scoop and the paint? or is that just what it said on the side of the crate?

]]>https://fargostreet.com/post/295458https://fargostreet.com/post/295458Sun, 25 Apr 2010 23:39:29 GMT<![CDATA[Reply to Nothing to see here... on Sun, 25 Apr 2010 02:13:29 GMT]]>

beachbum_jon;307011 wrote:
what carb is that?

Its from Dale Cubic at CFM Carbs. Its a 1150 built for E98.

]]>https://fargostreet.com/post/295415https://fargostreet.com/post/295415Sun, 25 Apr 2010 02:13:29 GMT<![CDATA[Reply to Nothing to see here... on Sat, 24 Apr 2010 20:00:25 GMT]]>what carb is that?

]]>https://fargostreet.com/post/295388https://fargostreet.com/post/295388Sat, 24 Apr 2010 20:00:25 GMT<![CDATA[Reply to Nothing to see here... on Sat, 24 Apr 2010 16:02:49 GMT]]>Real motors have the belt drives behind the motor:icon_albino:

]]>https://fargostreet.com/post/295363https://fargostreet.com/post/295363Sat, 24 Apr 2010 16:02:49 GMT<![CDATA[Reply to Nothing to see here... on Sat, 24 Apr 2010 15:41:09 GMT]]>wow, awesome dude

]]>https://fargostreet.com/post/295359https://fargostreet.com/post/295359Sat, 24 Apr 2010 15:41:09 GMT<![CDATA[Reply to Nothing to see here... on Sat, 24 Apr 2010 14:27:18 GMT]]>15 cfe

]]>https://fargostreet.com/post/295355https://fargostreet.com/post/295355Sat, 24 Apr 2010 14:27:18 GMT