<![CDATA[4G63 Civic Hatch]]>Began retrofitting the 4G63 intoa 92 civic hatch last night. Got both side mounts fittedand motor sitting in the chassis. Need to do some slight adjusting to the trans mount to shift the motor back a bit other than that fits in there pretty nicely.

Nick
SLS

Dec 9 101.jpg

]]>https://fargostreet.com/topic/1963/4g63-civic-hatchRSS for NodeWed, 27 May 2026 22:35:32 GMTWed, 16 Mar 2005 15:32:06 GMT60<![CDATA[Reply to 4G63 Civic Hatch on Wed, 11 Apr 2007 23:59:38 GMT]]>yeah i realized that it was started two years ago.. its just i have a civic shell, and a complete 4g63t set up (motor tranny ETC) and wanted to see if anyone who had done this had any comments on it..

]]>https://fargostreet.com/post/153538https://fargostreet.com/post/153538Wed, 11 Apr 2007 23:59:38 GMT<![CDATA[Reply to 4G63 Civic Hatch on Mon, 02 Apr 2007 00:29:41 GMT]]>damn. too bad this isn't a project anymore. only thing i saw wrong in the pictures was that the oil cap was on upside down....lol

]]>https://fargostreet.com/post/152002https://fargostreet.com/post/152002Mon, 02 Apr 2007 00:29:41 GMT<![CDATA[Reply to 4G63 Civic Hatch on Sun, 01 Apr 2007 23:48:09 GMT]]>

PineInchNenis69;162039 wrote:
Are you people not realizing this thread was started 2 years ago? The project doesn't exist anymore (as far as I know).

no shit sherlock...:icon_salut:

]]>https://fargostreet.com/post/152001https://fargostreet.com/post/152001Sun, 01 Apr 2007 23:48:09 GMT<![CDATA[Reply to 4G63 Civic Hatch on Sun, 01 Apr 2007 22:16:20 GMT]]>Are you people not realizing this thread was started 2 years ago? The project doesn't exist anymore (as far as I know).

]]>https://fargostreet.com/post/151997https://fargostreet.com/post/151997Sun, 01 Apr 2007 22:16:20 GMT<![CDATA[Reply to 4G63 Civic Hatch on Sun, 01 Apr 2007 21:39:03 GMT]]>yeah the 4g63 is a common swap for the colt, considering that it is very simular to the 4g61 that it came with

]]>https://fargostreet.com/post/151995https://fargostreet.com/post/151995Sun, 01 Apr 2007 21:39:03 GMT<![CDATA[Reply to 4G63 Civic Hatch on Sun, 01 Apr 2007 21:12:42 GMT]]>This is for sure going to be a nice swap, there is a dodge colt with a 4g63 that runs 10.5 at 148 im not sure of the horsepower but it does go over 200mph

]]>https://fargostreet.com/post/151993https://fargostreet.com/post/151993Sun, 01 Apr 2007 21:12:42 GMT<![CDATA[Reply to 4G63 Civic Hatch on Sun, 01 Apr 2007 18:17:05 GMT]]>4g63 in a civic....why take something reliable and make it unreliable...makes no sense 😉

]]>https://fargostreet.com/post/151992https://fargostreet.com/post/151992Sun, 01 Apr 2007 18:17:05 GMT<![CDATA[Reply to 4G63 Civic Hatch on Sun, 01 Apr 2007 16:39:36 GMT]]>holy back from the dead.

]]>https://fargostreet.com/post/151988https://fargostreet.com/post/151988Sun, 01 Apr 2007 16:39:36 GMT<![CDATA[Reply to 4G63 Civic Hatch on Sun, 01 Apr 2007 16:09:02 GMT]]>looking bad ass, i was thinking of doing this a couple months ago just to piss off a bunch of honda lover/dsm haters in aberdeen. is it just me or does that motor mount look kind of small?, maybe its just me, it looked small than what i expected.
but anyways, good work nick

]]>https://fargostreet.com/post/151985https://fargostreet.com/post/151985Sun, 01 Apr 2007 16:09:02 GMT<![CDATA[Reply to 4G63 Civic Hatch on Sun, 01 Apr 2007 01:08:44 GMT]]>no never got passed the fitment stage.

]]>https://fargostreet.com/post/151954https://fargostreet.com/post/151954Sun, 01 Apr 2007 01:08:44 GMT<![CDATA[Reply to 4G63 Civic Hatch on Sat, 31 Mar 2007 14:20:57 GMT]]>any updates on this project?? very very interested to know since i have a spare motor, tranny, ecu, wiring harness sitting in my garage plus a civic shell!!!

]]>https://fargostreet.com/post/151915https://fargostreet.com/post/151915Sat, 31 Mar 2007 14:20:57 GMT<![CDATA[Reply to 4G63 Civic Hatch on Mon, 28 Mar 2005 03:21:48 GMT]]>looks awsome, good luck with it.

]]>https://fargostreet.com/post/37636https://fargostreet.com/post/37636Mon, 28 Mar 2005 03:21:48 GMT<![CDATA[Reply to 4G63 Civic Hatch on Mon, 28 Mar 2005 02:23:58 GMT]]>that will be quite the sight when it is up and running

]]>https://fargostreet.com/post/37615https://fargostreet.com/post/37615Mon, 28 Mar 2005 02:23:58 GMT<![CDATA[Reply to 4G63 Civic Hatch on Tue, 22 Mar 2005 17:51:18 GMT]]>

smtomps1955 wrote:
that is going to be a nice hatch nick, do you just find rolling chasis for your projects??

Yup.

]]>https://fargostreet.com/post/36215https://fargostreet.com/post/36215Tue, 22 Mar 2005 17:51:18 GMT<![CDATA[Reply to 4G63 Civic Hatch on Tue, 22 Mar 2005 17:49:48 GMT]]>that is going to be a nice hatch nick, do you just find rolling chasis for your projects??

]]>https://fargostreet.com/post/36214https://fargostreet.com/post/36214Tue, 22 Mar 2005 17:49:48 GMT<![CDATA[Reply to 4G63 Civic Hatch on Tue, 22 Mar 2005 00:15:32 GMT]]>

kswissondubs wrote:
is it done yet... is it done yet...

Haven't had time to get anymore done on it yet. Hopefully get to doing the rear mount one of these days after work. Gonna start building a manifold for it as well sometime soon. Other than the axles everything else will just be bolt on and go.

Nick
SLS

]]>https://fargostreet.com/post/36086https://fargostreet.com/post/36086Tue, 22 Mar 2005 00:15:32 GMT<![CDATA[Reply to 4G63 Civic Hatch on Tue, 22 Mar 2005 00:10:29 GMT]]>Looks great, good luck with it

]]>https://fargostreet.com/post/36082https://fargostreet.com/post/36082Tue, 22 Mar 2005 00:10:29 GMT<![CDATA[Reply to 4G63 Civic Hatch on Mon, 21 Mar 2005 22:54:01 GMT]]>im sorry, im getting anxious to see it rip

]]>https://fargostreet.com/post/36053https://fargostreet.com/post/36053Mon, 21 Mar 2005 22:54:01 GMT<![CDATA[Reply to 4G63 Civic Hatch on Mon, 21 Mar 2005 22:34:03 GMT]]>I saw the beautiful hach last week so I would love to see it done.

]]>https://fargostreet.com/post/36042https://fargostreet.com/post/36042Mon, 21 Mar 2005 22:34:03 GMT<![CDATA[Reply to 4G63 Civic Hatch on Mon, 21 Mar 2005 21:20:13 GMT]]>

kswissondubs wrote:
is it done yet... is it done yet...
Yes Nick stopped working and has been doing nothing for the last week, but work on the hatch. He also uses magic to get it done quicker...

Just hold your pants on he will let us know whats going on.

]]>https://fargostreet.com/post/36010https://fargostreet.com/post/36010Mon, 21 Mar 2005 21:20:13 GMT<![CDATA[Reply to 4G63 Civic Hatch on Mon, 21 Mar 2005 20:34:38 GMT]]>

97Cav wrote:
any new pics on the progress of this beautiful hatch?
is it done yet... is it done yet...

]]>https://fargostreet.com/post/36001https://fargostreet.com/post/36001Mon, 21 Mar 2005 20:34:38 GMT<![CDATA[Reply to 4G63 Civic Hatch on Mon, 21 Mar 2005 19:55:43 GMT]]>

MrScary wrote:
Ok so I'm watchin Full Throttle last night and I started to think(amazing I know). I wonder how hard it would be to put a 4g63t into a Mini Cooper? Wouldn't that be awesome!!! 😄

i dunno about a 4g63 in a mini but there are quite a few people that have put b18's in them and made some pretty good numbers.

]]>https://fargostreet.com/post/35986https://fargostreet.com/post/35986Mon, 21 Mar 2005 19:55:43 GMT<![CDATA[Reply to 4G63 Civic Hatch on Mon, 21 Mar 2005 19:28:06 GMT]]>any new pics on the progress of this beautiful hatch?

]]>https://fargostreet.com/post/35982https://fargostreet.com/post/35982Mon, 21 Mar 2005 19:28:06 GMT<![CDATA[Reply to 4G63 Civic Hatch on Thu, 17 Mar 2005 22:31:58 GMT]]>Ok so I'm watchin Full Throttle last night and I started to think(amazing I know). I wonder how hard it would be to put a 4g63t into a Mini Cooper? Wouldn't that be awesome!!! 😄

]]>https://fargostreet.com/post/35197https://fargostreet.com/post/35197Thu, 17 Mar 2005 22:31:58 GMT