<![CDATA[Driveshaft work!]]>Figured i'd come on and whore myself out. I know there are quite a few "drifters" and drag racers on here who may need new shafts built or their old ones repaired(straightened/new joints and yokes). Me and a couple guys recently took over management/ownership of Dakota Driveline(formerly Thurlow's Welding and Machine shop). I can do anything from a simple replacement of a u-joint to machining out the old yokes and re-tubing. We carry moly tubing and Spicer joints to ensure once its in it will most likely outlast the life of your race car/mud truck/personal vehicle.

If you have any questions or need any work done call or text me at 701-541-1876, or call 701-282-2484. You can also swing by the shop at 3820 3rd Avenue north anytime Monday thru Friday 8am-5pm although we are usually here from 7am to usually around 8pm.

Thanks guys,
Matt Ohm

]]>https://fargostreet.com/topic/20874/driveshaft-workRSS for NodeWed, 27 May 2026 22:30:15 GMTSun, 03 Jun 2012 22:03:54 GMT60<![CDATA[Reply to Driveshaft work! on Thu, 14 Jun 2012 22:35:29 GMT]]>Sweet! Let me know!!!

]]>https://fargostreet.com/post/315209https://fargostreet.com/post/315209Thu, 14 Jun 2012 22:35:29 GMT<![CDATA[Reply to Driveshaft work! on Thu, 14 Jun 2012 16:20:05 GMT]]>Awesome to know! I will be getting a shaft made soon in the future here!

]]>https://fargostreet.com/post/315208https://fargostreet.com/post/315208Thu, 14 Jun 2012 16:20:05 GMT<![CDATA[Reply to Driveshaft work! on Thu, 14 Jun 2012 00:23:05 GMT]]>Thanks Ryan! PM'd you back sir.

]]>https://fargostreet.com/post/315203https://fargostreet.com/post/315203Thu, 14 Jun 2012 00:23:05 GMT<![CDATA[Reply to Driveshaft work! on Wed, 13 Jun 2012 23:22:03 GMT]]>PM'd, probably send work your way now instead of Catco.

Ryan

]]>https://fargostreet.com/post/315202https://fargostreet.com/post/315202Wed, 13 Jun 2012 23:22:03 GMT<![CDATA[Reply to Driveshaft work! on Wed, 06 Jun 2012 02:32:39 GMT]]>ill build you one for the right amount of dollars!

]]>https://fargostreet.com/post/315165https://fargostreet.com/post/315165Wed, 06 Jun 2012 02:32:39 GMT<![CDATA[Reply to Driveshaft work! on Wed, 06 Jun 2012 02:11:48 GMT]]>Ohm, i love racing karts..... 😉

]]>https://fargostreet.com/post/315164https://fargostreet.com/post/315164Wed, 06 Jun 2012 02:11:48 GMT<![CDATA[Reply to Driveshaft work! on Tue, 05 Jun 2012 02:48:26 GMT]]>GSXR kart may be put on backburner for a bit. Acquired a busa motor and Tranny today...

]]>https://fargostreet.com/post/315160https://fargostreet.com/post/315160Tue, 05 Jun 2012 02:48:26 GMT<![CDATA[Reply to Driveshaft work! on Mon, 04 Jun 2012 17:45:15 GMT]]>

D S ohM;326914 wrote:
Like I said, we are all caught up as of now. Feel free to swing by and check out the shop anytime though. We have been spending our free time building go karts...mine will have a GSXR 600 motor going in as soon as i find a head and carbs for it. Yikes...

I definitely wanna take that for a spin, lol

]]>https://fargostreet.com/post/315158https://fargostreet.com/post/315158Mon, 04 Jun 2012 17:45:15 GMT<![CDATA[Reply to Driveshaft work! on Mon, 04 Jun 2012 13:30:53 GMT]]>

DaveH;326915 wrote:
Are you in the old thurlow building?

No. We are located at 3820 3rd Ave N now. Our shop is right across the tracks from Hardees. You can see the giant glass pile from Main.

]]>https://fargostreet.com/post/315156https://fargostreet.com/post/315156Mon, 04 Jun 2012 13:30:53 GMT<![CDATA[Reply to Driveshaft work! on Mon, 04 Jun 2012 12:54:30 GMT]]>Are you in the old thurlow building?

]]>https://fargostreet.com/post/315155https://fargostreet.com/post/315155Mon, 04 Jun 2012 12:54:30 GMT<![CDATA[Reply to Driveshaft work! on Mon, 04 Jun 2012 12:36:08 GMT]]>Like I said, we are all caught up as of now. Feel free to swing by and check out the shop anytime though. We have been spending our free time building go karts...mine will have a GSXR 600 motor going in as soon as i find a head and carbs for it. Yikes...

]]>https://fargostreet.com/post/315154https://fargostreet.com/post/315154Mon, 04 Jun 2012 12:36:08 GMT<![CDATA[Reply to Driveshaft work! on Mon, 04 Jun 2012 12:30:08 GMT]]>Hell yes, if you need any help around there I have alot of weekdays off just LMK would give me something to do anyways!

]]>https://fargostreet.com/post/315152https://fargostreet.com/post/315152Mon, 04 Jun 2012 12:30:08 GMT<![CDATA[Reply to Driveshaft work! on Mon, 04 Jun 2012 12:03:11 GMT]]>

90rs&01rs;326904 wrote:
I hope you can do a better job at getting thing's done in a timely matter over the previous management. Are going to be able to build and modify Aluminum driveshaft's?

We can, it all depends on what you want done. We cant heat straighten the tubes but we can replace joints and balance them. I generally recommend new steel or moly shafts to those with aluminum ones though. Aluminum is too easy too wreck, I have seen several shafts come in that are beyond repair because of rocks, speed bumps, etc.

And in response to your comment about getting things done, yes. We took over and within 2 weeks we were completely caught up with the work that was on the shelves. As long as there arent 8 shafts on the rack before yours we can usually have it back to you within a day as long as we dont have to order parts from outside sources.

Bookem;326906 wrote:
Are you guys still doing aluminum fuel tank repairs?

Heck yes we are. We usually knock out 3 or 4 a week.

]]>https://fargostreet.com/post/315147https://fargostreet.com/post/315147Mon, 04 Jun 2012 12:03:11 GMT<![CDATA[Reply to Driveshaft work! on Mon, 04 Jun 2012 04:41:57 GMT]]>Are you guys still doing aluminum fuel tank repairs?

]]>https://fargostreet.com/post/315146https://fargostreet.com/post/315146Mon, 04 Jun 2012 04:41:57 GMT<![CDATA[Reply to Driveshaft work! on Mon, 04 Jun 2012 02:38:52 GMT]]>I hope you can do a better job at getting thing's done in a timely matter over the previous management. Are going to be able to build and modify Aluminum driveshaft's?

]]>https://fargostreet.com/post/315144https://fargostreet.com/post/315144Mon, 04 Jun 2012 02:38:52 GMT<![CDATA[Reply to Driveshaft work! on Sun, 03 Jun 2012 22:10:10 GMT]]>Forgot to mention we also just acquired a Bendpak tubing bender with all dies ranging from 1.5" up to 3" courtesy of Travis(gsrEK) and we have a Miller Dynasty 350 tig welder. So yeah...can do pretty much anything your pretty little hearts desire.

]]>https://fargostreet.com/post/315142https://fargostreet.com/post/315142Sun, 03 Jun 2012 22:10:10 GMT