<![CDATA[92 tsi part out]]>I finally got smart and decided to get rid of my talon, and im parting it out. everything is really cheap. If its not listed, let me know, i might have it.
(Lots of stock parts also) Phone# (701) 200-2923

ACT lightened flywheel-$100
built 6 bolt motor-$1500 obo (paid $3300)
ACT 2600 lb clutch kit-SOLD (less than 500 miles)
4 bolt rearend-$225
autometer aultra light: boost, volts, oil pressure, water temp, and air/fuel guages- $100 for all of them
vent triple guage-$10
radio afc II pod-$10
tranny-$100 (shifts ok)
transfer case-$75
TEIN coilover kit-$900 (no more than 2500 miles on em)
stainless turbo oil line-$25
3" stainless turbo back with o2 eliminator-$450 (needs new flex pipe)
14b turbo-$50 (no shaft play and no smoke)
AFC II-$225
grex front strut bar-$50 (p-i-m-p)
slotted rotors-$50 for all four (one needs to be replaced)
dejon tool 3" intake pipe-SOLD
2g mas with k&n filter-$85
denso 550cc injectors-SOLD
stainless clutch line-$20
ported 2g exhaust manifold-$85
shaved and polished valve cover-SOLD
urethane motor mounts-$55
255 lph high pressure fuel pump-$40
aeromotive FPR with gauge, lines and flange for fuel rail-SOLD
shell-best offer
black leather seats-$100 (really rare)
hallman pro boost controller-$65
hard shifter bushings-$20

]]>https://fargostreet.com/topic/2944/92-tsi-part-outRSS for NodeThu, 28 May 2026 17:16:42 GMTWed, 08 Jun 2005 03:33:11 GMT60<![CDATA[Reply to 92 tsi part out on Tue, 14 Jun 2005 19:56:15 GMT]]>hey bryan answer your phone you tool i need parts lol
the guages

]]>https://fargostreet.com/post/52783https://fargostreet.com/post/52783Tue, 14 Jun 2005 19:56:15 GMT<![CDATA[Reply to 92 tsi part out on Sun, 12 Jun 2005 00:46:10 GMT]]>

LT1 wrote:
what about rims and tires?
You can buy them here for $700
http://www.fargostreet.com/showthread.php?t=2974

]]>https://fargostreet.com/post/52086https://fargostreet.com/post/52086Sun, 12 Jun 2005 00:46:10 GMT<![CDATA[Reply to 92 tsi part out on Sat, 11 Jun 2005 18:59:05 GMT]]>what about rims and tires?

]]>https://fargostreet.com/post/52048https://fargostreet.com/post/52048Sat, 11 Jun 2005 18:59:05 GMT<![CDATA[Reply to 92 tsi part out on Sat, 11 Jun 2005 01:49:12 GMT]]>do you still have the injectors?

]]>https://fargostreet.com/post/52009https://fargostreet.com/post/52009Sat, 11 Jun 2005 01:49:12 GMT<![CDATA[Reply to 92 tsi part out on Fri, 10 Jun 2005 22:46:48 GMT]]>I will give you 32 bucks and a red crayon for the dizzum

]]>https://fargostreet.com/post/51979https://fargostreet.com/post/51979Fri, 10 Jun 2005 22:46:48 GMT<![CDATA[Reply to 92 tsi part out on Wed, 08 Jun 2005 21:29:55 GMT]]>I noticed there are a few parts more than one person wants so if you bring me the money first then you get what you want.

]]>https://fargostreet.com/post/51544https://fargostreet.com/post/51544Wed, 08 Jun 2005 21:29:55 GMT<![CDATA[Reply to 92 tsi part out on Wed, 08 Jun 2005 18:20:24 GMT]]>

Bad93ex wrote:
By Green Bay.
pm'd

]]>https://fargostreet.com/post/51509https://fargostreet.com/post/51509Wed, 08 Jun 2005 18:20:24 GMT<![CDATA[Reply to 92 tsi part out on Wed, 08 Jun 2005 17:39:02 GMT]]>

IridePSI wrote:
where in wisconson?
By Green Bay.

]]>https://fargostreet.com/post/51497https://fargostreet.com/post/51497Wed, 08 Jun 2005 17:39:02 GMT<![CDATA[Reply to 92 tsi part out on Wed, 08 Jun 2005 16:45:36 GMT]]>PM'd....i might have ur phone # but PM me back so i can get it again so i can pick up the intake pipe and maybe the valve cover.

]]>https://fargostreet.com/post/51476https://fargostreet.com/post/51476Wed, 08 Jun 2005 16:45:36 GMT<![CDATA[Reply to 92 tsi part out on Wed, 08 Jun 2005 16:41:47 GMT]]>

mwc1 wrote:
is the dejon tool intake pipe for the stock mas??? if so i'll take it...
I had both 1g and a 2g mas on there. it works for both.

]]>https://fargostreet.com/post/51474https://fargostreet.com/post/51474Wed, 08 Jun 2005 16:41:47 GMT<![CDATA[Reply to 92 tsi part out on Wed, 08 Jun 2005 16:41:06 GMT]]>

Bad93ex wrote:
How will I get you the money for the injectors? I live in WI.
where in wisconson?

]]>https://fargostreet.com/post/51473https://fargostreet.com/post/51473Wed, 08 Jun 2005 16:41:06 GMT<![CDATA[Reply to 92 tsi part out on Wed, 08 Jun 2005 06:13:05 GMT]]>is the dejon tool intake pipe for the stock mas??? if so i'll take it...

]]>https://fargostreet.com/post/51410https://fargostreet.com/post/51410Wed, 08 Jun 2005 06:13:05 GMT<![CDATA[Reply to 92 tsi part out on Wed, 08 Jun 2005 05:48:36 GMT]]>I was going to offer 75 for the boost, oil pressure, and water temp.

]]>https://fargostreet.com/post/51408https://fargostreet.com/post/51408Wed, 08 Jun 2005 05:48:36 GMT<![CDATA[Reply to 92 tsi part out on Wed, 08 Jun 2005 05:44:52 GMT]]>How will I get you the money for the injectors? I live in WI.

]]>https://fargostreet.com/post/51404https://fargostreet.com/post/51404Wed, 08 Jun 2005 05:44:52 GMT<![CDATA[Reply to 92 tsi part out on Wed, 08 Jun 2005 05:36:07 GMT]]>

TsiTom wrote:
This souds really weird but would you be willing to sell just the harness off that 2g mas???
ten bucks?

]]>https://fargostreet.com/post/51403https://fargostreet.com/post/51403Wed, 08 Jun 2005 05:36:07 GMT<![CDATA[Reply to 92 tsi part out on Wed, 08 Jun 2005 05:34:05 GMT]]>🙂

]]>https://fargostreet.com/post/51401https://fargostreet.com/post/51401Wed, 08 Jun 2005 05:34:05 GMT<![CDATA[Reply to 92 tsi part out on Wed, 08 Jun 2005 05:32:55 GMT]]>

Jim wrote:
Sorry, I'm not going to pay more then $30 for used gauges that cost $50 new.... If blake wants to thats up to him....
for the injectors smart ass 😉

]]>https://fargostreet.com/post/51400https://fargostreet.com/post/51400Wed, 08 Jun 2005 05:32:55 GMT<![CDATA[Reply to 92 tsi part out on Wed, 08 Jun 2005 05:26:59 GMT]]>Sorry, I'm not going to pay more then $30 for used gauges that cost $50 new.... If blake wants to thats up to him....

]]>https://fargostreet.com/post/51395https://fargostreet.com/post/51395Wed, 08 Jun 2005 05:26:59 GMT<![CDATA[Reply to 92 tsi part out on Wed, 08 Jun 2005 05:24:58 GMT]]>

btleier wrote:
If Jim doesn't buy the gauges I will take the boost, oil pressure, and water temp off your hands. They're ultra-lite silver face right? Is the boost -30 - 30? Also I'll take dibs on the injectors if bad93 doesn't buy em.

Start bidding fellas.

]]>https://fargostreet.com/post/51392https://fargostreet.com/post/51392Wed, 08 Jun 2005 05:24:58 GMT<![CDATA[Reply to 92 tsi part out on Wed, 08 Jun 2005 05:23:42 GMT]]>

Jim wrote:
I'm interested in your valve cover, your FPR (lines etc etc), clutch line, and your gauges...

Either kevin or I will talk to you tomorrow about it....
Sounds good, or you can call me.

]]>https://fargostreet.com/post/51389https://fargostreet.com/post/51389Wed, 08 Jun 2005 05:23:42 GMT<![CDATA[Reply to 92 tsi part out on Wed, 08 Jun 2005 05:22:42 GMT]]>

TsiTom wrote:
And ill for sure take your center console/armrest if its in good condition
Perfect condition, how's $25 sound?

]]>https://fargostreet.com/post/51387https://fargostreet.com/post/51387Wed, 08 Jun 2005 05:22:42 GMT<![CDATA[Reply to 92 tsi part out on Wed, 08 Jun 2005 05:20:52 GMT]]>

95TsiAWD wrote:
Part otu the 6 bolt? Just want block/crank etc. No rods or pistons or head.
I can't do that, I can only sell the whole motor, sorry man.

]]>https://fargostreet.com/post/51385https://fargostreet.com/post/51385Wed, 08 Jun 2005 05:20:52 GMT<![CDATA[Reply to 92 tsi part out on Wed, 08 Jun 2005 05:17:43 GMT]]>

Bad93ex wrote:
OK I want the injectors and FPR for sure.

Which rotor needs replacing?
This is 92's bro. The passenger rear needs one. Alright, call 701-200-2923 and ask for Bryan, and he'll deliver wherever you need it.

]]>https://fargostreet.com/post/51383https://fargostreet.com/post/51383Wed, 08 Jun 2005 05:17:43 GMT<![CDATA[Reply to 92 tsi part out on Wed, 08 Jun 2005 05:09:08 GMT]]>If Jim doesn't buy the gauges I will take the boost, oil pressure, and water temp off your hands. They're ultra-lite silver face right? Is the boost -30 - 30? Also I'll take dibs on the injectors if bad93 doesn't buy em.

]]>https://fargostreet.com/post/51381https://fargostreet.com/post/51381Wed, 08 Jun 2005 05:09:08 GMT