really tight bolt removal

[moparguy]

soak it in a quality penetrating fluid like JB-80 or PB Blaster. then wrench on it, sometimes use a box end wrench and a cheater on the end of it to get really stubborn bolts out.

next step is heat. heat it up then try wrenching on it. but dont forgot ya heated it up. it hurts. haha

[MisterCMK]

91nbtsi wrote:
Vise grips.

Bad idea. If the bolt is not stripped you will strip it by using vice grips

[91nbtsi]

MisterCMK wrote:
Bad idea. If the bolt is not stripped you will strip it by using vice grips

Not if you aren't a pussy.:icon_thumright:

I am JK btw, use the vice grips as a last resort...

[MisterCMK]

lollerskates

I have found that just heating the bolt works 95% of the time

[Fitzy]

Impact gun

[jct_4628]

what do you heat the bolt with?

[SmitEvo]

use a blow torch..........:p

[jct_4628]

99slowGSX wrote:
use a blow torch..........:p

even if I had one, I dont think I would use it.

[SmitEvo]

just giving you some crap.......would a heat gun work?

[91nbtsi]

Um, you heat the bolt with a torch...

[jct_4628]

I have a soldering iron, could I just set it on the bolt and let it warm up?

Also, do you think an impact driver might work?

[91nbtsi]

jct_4628 wrote:
I have a soldering iron, could I just set it on the bolt and let it warm up?

Also, do you think an impact driver might work?

No, soldering iron probably won't work. Use an impact with a 6 pt socket.

[PSiedTSi]

ALWAYS use a 6pt socket for tight bolts...

[MisterCMK]

jct_4628 wrote:
I have a soldering iron, could I just set it on the bolt and let it warm up?

Also, do you think an impact driver might work?

No. A soldering iron is for wires, not bolts.

Just go to the store and buy a propane torch. They are pretty cheap. Heating the bolt up along with a large breaker bar will remove it pretty easily.

[CheapSRT]

:drunken_smilie: Get a bigger hammer!!!:drunken_smilie: