Your Job
-
StangerBanger96 wrote:
Ryan...this is kinda off topic but do you know of any recalls out for 2002 (believe) town and country vans? My mom's van has been a nonstop problem since we bought it in 2002/3 whatever year it is and they always tell us nothings wrong when we bring it in but that's far from the case...What problems has she encountered? There are always problems with many different vehicles (intake mani leaks GMs, Ford DPFE sensors/switches, Toyota oil slugging, Chrysler electrical) that are just considered wear and tear. A recall only happens if there are:
Large number of vehicles with the problem
Production problems
Potential safety
Potential emissionsYes, they have many recalls for that vehcile, but if the vehicle makes the 3/36 then the manufacture considers that it is a good vehcile and shouldn't have any problems....
I can list quite a few problems with those:
Front swaybar bushings (clunking noise)
Front swaybar links (clunking noise)
Rack-n-pinions (leaks)
Tie rods (both inner and outer)
Water pumps (leaking at weap holes)
Transmission failure
and many moreAll of those problems are considered wear and tear and are usually not even covered under warranty. The Rack and Tranny issues are usually backed up with the defense of not changing the fluid enough. We recommend flushing transmission fluids every 30K and 24K for PS systems. Suspension parts are always wear and tear unless they discover a problem (ball joints on Durango/Dakotas, Steering knuckles on Durangos.
Let me know what problems there are and I can help you know if they are common or not.
-
i drive a semi and grain cart during harvest. and am soon getting a job at a bodyshop near aberdeen.
-
part-time service advisor for corwin honda/chrysler
here a psht, there psht, everywhere a psht psht
PVC SQUAD MEMBER #2- 95 CIVIC EX- DD 320whp on a mustang dyno
-
i work at apartment pros/precision van lines, the job sucks but it pays the bills, and im also in the MN national guard.
-
nuckinfuts wrote:
i work at apartment pros/precision van lines, the job sucks but it pays the bills, and im also in the MN national guard.I'm also in the MN national guard, I usually don't claim it sense I haven't gone to basic yet. But I go in March!
-
Consultant
For instance:
http://www.in-forum.com/articles/index.cfm?id=145744§ion=Opinion
http://www.in-forum.com/archive/index.cfm?page=archive_article&id=323171-I'm the "Eide Bailly" guy in the middle of this mess, if you've been following the papers...
Oh, and soon to be "student" again like 80% of the people on this board
Fvckin machine took my quarter
-
MrScary wrote:
I'm also in the MN national guard, I usually don't claim it sense I haven't gone to basic yet. But I go in March!
cool i leave in Jan. Fort jackson here i come
-
I'm a full time night shift industrial mechanic/automation technition. I graduate from MSCTC in December. Probibily going to MSU after that for Operations Management. Maybe some day I'll go back into engineering if I ever get motivated enough?
-
ticklemedaly wrote:
What problems has she encountered? There are always problems with many different vehicles (intake mani leaks GMs, Ford DPFE sensors/switches, Toyota oil slugging, Chrysler electrical) that are just considered wear and tear. A recall only happens if there are:Large number of vehicles with the problem
Production problems
Potential safety
Potential emissionsYes, they have many recalls for that vehcile, but if the vehicle makes the 3/36 then the manufacture considers that it is a good vehcile and shouldn't have any problems....
I can list quite a few problems with those:
Front swaybar bushings (clunking noise)
Front swaybar links (clunking noise)
Rack-n-pinions (leaks)
Tie rods (both inner and outer)
Water pumps (leaking at weap holes)
Transmission failure
and many moreAll of those problems are considered wear and tear and are usually not even covered under warranty. The Rack and Tranny issues are usually backed up with the defense of not changing the fluid enough. We recommend flushing transmission fluids every 30K and 24K for PS systems. Suspension parts are always wear and tear unless they discover a problem (ball joints on Durango/Dakotas, Steering knuckles on Durangos.
Let me know what problems there are and I can help you know if they are common or not.
Well some of it is just stupid stuff that probably wouldn't get covered anyways BUT ...since the first year she had it the brakes have been noisey as hell, especially in winter. No amount of lube or anything on our part has helped and every time we take it in they say there is nothing wrong or rubbing or anything. The struts are bad, the motors in the doors have broken twice now, we got one fixed under warranty and now it's really flakey again. The rear door doesn't work all the time, the locks don't always work right from the inside, the clock spring for the airbags broke at least 5 times in the first 3 years we owned it (all were covered under warranty though). I dunno, various things, some of which I can't remember right now.
-
beachbum_jon wrote:
i drive a semi and grain cart during harvest. and am soon getting a job at a bodyshop near aberdeen.
Would that be at ershman's shop in groten?? I went to school with
a guy from down there. -
StangerBanger96 wrote:
Well some of it is just stupid stuff that probably wouldn't get covered anyways BUT ...since the first year she had it the brakes have been noisey as hell, especially in winter. No amount of lube or anything on our part has helped and every time we take it in they say there is nothing wrong or rubbing or anything. The struts are bad, the motors in the doors have broken twice now, we got one fixed under warranty and now it's really flakey again. The rear door doesn't work all the time, the locks don't always work right from the inside, the clock spring for the airbags broke at least 5 times in the first 3 years we owned it (all were covered under warranty though). I dunno, various things, some of which I can't remember right now.Those are all common problems with them:
Brakes are always noisy, period.
Struts should be replaced for Prevenative Maint around 60-70K, unless driven only on highway.
Sliding door motors and harnesses go out all the time.
Dont get me started on the rear door....the outside switch corrodes, latch switch/motor, motor to lift/close.
BCM for the locks (although they have a flash available, they still go bad)
Depending on what year, the clockspring might have a lifetime warranty, have a big recall on those.What exactly is wrong with the struts? I have a lot of people complaining of clunking in the front and think that it is the struts but it is just the swaybar bushings and links.
Hope that helps, and although it is a pain in the ass to deal with these problems, the parts are actually really cheap and VERY easy to install.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login