Suby crew: RS swap arrived! WOOT!
-
The rewiring is done. All that remains is splicing in 13 USDM ECU wires to the JDM ECU plugs, and running 2 power wires from the JDM harness to the USDM main relay. Now it is time to accumulate some parts (clutch, downpipe, etc...) I ordered up some DEFI's today and am hoping to have this thing on the road soon.
Zac,
As stated above, the EJ20g is a stock JDM motor. Although it has more power than USDM WRX's, putting the engine in the car is really no different than what it came from the factory with in JDMland. The PowerFC is really the only tuning option, with the exception of Eprom chips. I plan to make the PowerFC a purchase sometime in the future, however I have many things I need to get before I really start pushing power (suspension is top of the list next...as the RS suspension now is shot...) I will post more information when the motor is going in, and hopefully a few shots with exhaust coming out the tailpipe. :icon_cheers:
-
I have a PDE dp laying around if you need one Jason...just make an offer.
-
tjamz;211698 wrote:
I have a PDE dp laying around if you need one Jason...just make an offer.Is it catless? Stainless? 3"? I haven't looked into PDE at all, so I know very little about them. I planned to get either the HKS or INJEN, but if you want to sell that for cheap, and it is Catless 3" Stainless, PM me.
Jason
-
Well, my butt hurts....
Today I ordered up some goodies:
HKS downpipe (most cost effective for now)
Invidia uppipe
Tial 38mm
Stainless Tial flanges =
External Wastegate SetupExedy Clutch
Timing Belt
Group N Motor and Tranny Mounts
Walbro 255
Friday I ordered some Defi 60mm gauges with the gauge visors (for teh madd JDM stylez)
Next up will be:
Denso Iridium IK22 plugs
Alternator/AC belts
ENEOS fluidsThen turn the key and hope for profit!
-
some people have too much money to waste!
-
FG2;212189 wrote:
Well, my butt hurts....Today I ordered up some goodies:
HKS downpipe (most cost effective for now)
Invidia uppipe
Tial 38mm
Stainless Tial flanges =
External Wastegate SetupExedy Clutch
Timing Belt
Group N Motor and Tranny Mounts
Walbro 255
Friday I ordered some Defi 60mm gauges with the gauge visors (for teh madd JDM stylez)
Next up will be:
Denso Iridium IK22 plugs
Alternator/AC belts
ENEOS fluidsThen turn the key and hope for profit!
does that mean its fast then? lol i cant wait for it to run and all!
-
Was wondering if you were going ewg when you mentioned the HKS downpipe before, should be schweet maing.
-
Parts have started to arrive:
DEFI Link Meter 60mm (green lit to match RS/WRX gauges) w/meter controller/recorder:
Invidia stainless uppipe, tial 38mm wastegate, flanges:
Exedy Clutch, HKS downpipe:
Walbro 255 Fuel Pump:
JDM STi Motor/Tranny Mounts:
And I ordered up a set of Rota G-Force wheels yesterday. 17x8, et 48, black with red lip (should mate with red car...VERY well):
We are looking to cut into the RS in 2 weeks for the swap. WOOT!
-
Rexwagon;213077 wrote:
Those wheels are hot. IF they dont work well for the car, I will take em off your hands.haha....if they don't work, I plan to make them work!
I like to change up wheels yearly tho, so if you are still interested end of the year, we can talk! -
Those rotas are gonna blow up on you for getting knock off wheels....
Just kidding, things look great and that should be a fun car.
-
Got some tires for the Rota's along with some Rays lug nuts, so I will do some fender rolling tonight (thanks Colin).
Also go in some uber rare Prodrive floor mats for the GC chassis...Look pimp
NRG Grounding kits are back in stock, and I have one set aside for the RS
And to finish off my ordering, I got some Tanabe Pro SS Coilovers on the way! WOOT
Motor is going in this weekend!
-
Wow, wow, wow, and did I say WOW!
-
Well the games have begun.
7 hours of work thus far from Shane and I...and Chuck helped a bit to (cheap labor, each screw he removed he got 5 chips)
Laske is coming over tomorrow to notch the crossmember and weld the flap on the turbo shut....
Here is some progress:
Such a great day!
-
FG2;215413 wrote:
Well the games have begun.7 hours of work thus far from Shane and I...and Chuck helped a bit to (cheap labor, each screw he removed he got 5 chips)
Hehe....the joke is on you...I took 6 chips a couple of times BUWAHAHAHAHAHAHAHAHAHAHAAHAH
-
No comeback Chuck?
Just know I was completely joking.Well great news. The motor runs! Turned the key and only had to hold it about 3 seconds and she fires right up. Only 2 CEL's, and both are related to the fact that we didn't have the intercooler on or the boost control solenoid hooked up (still have to route wires, so these were intentionally left unhooked). Tomorrow will bring the rest of the install (minor items), DEFI's, coilovers, and reinstallation of the interior (eek!). Then 500 miles of breaking in a clutch....THAT is gonna suck!
Soon to hit the streets, the coupe WRS. WOOT :icon_cheers:
-
looks good, seems like you got a shop full of subarus again too!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login