ms paint skillz

[KA-T_240]

LOL!

Just so you know.... There may be a ca in my shop this spring.....

[Afsil80]

As long as it's not an SR20...

[Parker]

zbrown;241848 wrote:
nothing in it at the moment
it never had anything anyway :rolleyes:

weak

[zbrown]

Parker;241857 wrote:
it never had anything anyway :rolleyes:

weak

anything is better than a leaky, seepy SBC

[Parker]

last time i checked.... mine dosen't leak.... just as clean as it was at the car show...

try again

[MisterCMK]

Parker;241860 wrote:
last time i checked.... mine dosen't leak.... just as clean as it was at the car show...

try again

It also has just as many miles on it as at the car show.

[zbrown]

Parker;241860 wrote:
last time i checked.... mine dosen't leak.... just as clean as it was at the car show...

ummm.... it has to be driven to show 95% of the leaks....

report back when atleast 5 heat cycles are accomplished

[MisterCMK]

zbrown;241863 wrote:
ummm.... it has to be driven to show 95% of the leaks....

report back when atleast 5 heat cycles are accomplished

repost

See my post above

[Parker]

MisterCMK;241862 wrote:
It also has just as many miles on it as at the car show.
dont you have a tranny to fix?

[Parker]

zbrown;241863 wrote:
ummm.... it has to be driven to show 95% of the leaks....

report back when atleast 5 heat cycles are accomplished
crankcase evac system pwns you

gtfo

[MisterCMK]

Parker;241866 wrote:
dont you have a tranny to fix?

Don't you have a bed side....

Don't start this :lol:

[zbrown]

MisterCMK;241865 wrote:
repost

See my post above

I was typing as you posted............... goddamn.... if you dont have something nice to say dont say anything at all

Parker;241867 wrote:
crankcase evac system pwns you

O-rings >>> an EVAC system used as a bandaid

[Parker]

MisterCMK;241868 wrote:
Don't you have a bed side....

Don't start this :lol:
my truck moves... how about yours?

[Parker]

zbrown;241869 wrote:
I was typing as you posted............... goddamn.... if you dont have something nice to say dont say anything at all

O-rings >>> an EVAC system used as a bandaid
yeah your right..... o rings will fix the positive crankcase pressure and give my cyl rings a total seal.... good job zac.... you know it all... i used it as a bandaid on a brand new motor....

[MisterCMK]

Parker;241871 wrote:
my truck moves... how about yours?

lulz, at least mine isn't a mall crawler, Mr. Mud Terrain tires but yet never drives through mud

[MisterCMK]

Parker;241872 wrote:
yeah your right..... o rings will fix the positive crankcase pressure and give my cyl rings a total seal.... good job zac.... you know it all...

a SBC with rings that don't seal? Whodathunkit?

[Parker]

MisterCMK;241873 wrote:
lulz, at least mine isn't a mall crawler, Mr. Mud Terrain tires but yet never drives through mud
from what i remember it wont be too long before you will be able to flinstone yours..... fred

[MisterCMK]

Parker;241875 wrote:
from what i remember it wont be too long before you will be able to flinstone yours..... fred

Shouldn't you be looking into an opening at the dealership to have the rear end rebuilt? Should I start looking for a crate motor now or after you drop the valve?

[Parker]

MisterCMK;241876 wrote:
Shouldn't you be looking into an opening at the dealership to have the rear end rebuilt? Should I start looking for a crate motor now or after you drop the valve?
maybe you should rebuild it for me.... oh wait it seems you have to do that twice too... good job... sorta like your valve body... but that will be three times....

[zbrown]

Parker;241872 wrote:
yeah your right..... o rings will fix the positive crankcase pressure and give my cyl rings a total seal.... good job zac.... you know it all... i used it as a bandaid on a brand new motor....

I call BS on no leaks....EVAC or not

I could have inspected for leaks, but you were to big of a dick head, and stood me up............../story