05 is300
-
There are a few variables. What size? what finish are they now? paint/PC/Chrome? is there any damage that you want repaired? What color do you want them coated? Single color, 2-tone? outer stripe? It is much easier to stop in with them.
All we can do is give a pretty close quote, based on what we have done in the past. Prices are going to vary on the above.
Whatever we get invoiced is what you will pay. We don't mark up something that we hand over to someone else to have done. We are happy to offer the service.
Same rule applies to engine work, painting, rotor/flywheel turning, etc.. If we are doing a head gasket and you need machine work done. We will remove the head and take it to the machine shop. Then when we get the bill from them, that's what you pay.
-
I would recommend Dan at Elite Powdercoating here in Fargo. He did the wheels on my bike, along with some other small stuff and it turned out absolutely perfect. He is VERY VERY good at it and you won't be disappointed. PM me if you want his phone number.
-
treimche;270514 wrote:
I would recommend Dan at Elite Powdercoating here in Fargo. He did the wheels on my bike, along with some other small stuff and it turned out absolutely perfect. He is VERY VERY good at it and you won't be disappointed. PM me if you want his phone number.So there is no confusion, that's who we use. He is very good. We have many samples of his work here at the shop.
-
-
Dan did my STI wheels and a bunch of parts on the integra and it all turned out really nice.
-
Bp-08;270548 wrote:
say how much does it cost to get 4 wheels powdercoated in general? Doesnt have to be exact I just want to know a general number, and I can get them prepped myself.There are a few variables. What size? what finish are they now? paint/PC/Chrome? is there any damage that you want repaired? What color do you want them coated? Single color, 2-tone? outer stripe? It is much easier to stop in with them.
READING IS YOUR BEST FRIEND!!!!!!!:icon_cheers:
2003 Mitsubishi Evolution 8
2011 Ford F150 Ecoboost
-
YellowEvo;270551 wrote:
READING IS YOUR BEST FRIEND!!!!!!!:icon_cheers:It would still be nice to hear a ballpark figure.
> Mitch Hedberg wrote:
> I'm sick of following my dreams, I'm just going to find out where they are going and hook up with them later.ASE certified parts specialist.
2004 Impala LS 3.8 -
integra_gsr98;270544 wrote:
Dan did my STI wheels and a bunch of parts on the integra and it all turned out really nice.Nick, can you post a pic of your wheels? thanks..
-
Man I miss that car.
-
treimche;270575 wrote:
I'd guess anywhere from $1 - $1000, there is the ballpark.Ballpark more like time zone jackass
> Mitch Hedberg wrote:
> I'm sick of following my dreams, I'm just going to find out where they are going and hook up with them later.ASE certified parts specialist.
2004 Impala LS 3.8 -
Ask a stupid question, get a stupid answer.
-
How exactly is that a stupid question? I'm not asking for an exact # but the thought had crossed my mind for the stock wheels on my Impala.
> Mitch Hedberg wrote:
> I'm sick of following my dreams, I'm just going to find out where they are going and hook up with them later.ASE certified parts specialist.
2004 Impala LS 3.8
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login