cheap performance
-
get a supercharger not a turbo....but yeah i agree with troy sell it....atleast its not the 3.4 camaro
-
I didn't think you can put a Mitsu 20G into a Camaro. In fact, I doubt it, a 4g63 manifold would not fit. Anyhow, "cheap performance" really doesn't exist. You really won't get much power spending money on an aftermarket intake or header. Lots of money equates to lots of power.
Nitrous would probably be the best bang for the buck here.
2005 Mercedes-Benz C240 4Matic
1993 Mazda Rx-7 Twin Turbo (sold)
-
Mine is tiny
- just a wee bit larger then the stock td05...but you know I think it spools just about the same - but I have the boost loop set REALLLY low. -
treimche wrote:
Sell it.agreed.
BUT....
5speed or auto?5speed - aftermarket shifter of your choice to cleanly sling through the gears.
Auto - Torque Convertor possibly. Would have to know the specs on the factory unit, but a new TC could probably wake the car up.Gears - good ole standby
-straight pipes/headers. It's a V6...who knows how good that will actually sound.
I'd wait before either of those and find someone who has experience with that motor...find out if either of those would pick up any horsepower. I'd bet the heads/intake don't flow enough to warrant some huge exahust setup (and then you fight with losing the torque numbers)for not-so-cheap performance, look into what's available for Heads (probalby an OEM port/polish job) and a cam. I'd be willing to bet Vortech has a kit for that car...if not (for some cars) they're not too hard to piece together....and go that route.
(I'd reccomend looking into a F-body forum for input honestly...)
-
Is this the same 3.8 that is found in the Pontiac GP? If so you could steal some ideas from them. I know there is a more aggressive rocker arm set you can get for that engine, would be a good project.
edit: Not lifters, rocker arms.
-
the turbo would be very easy and inexpensive for some quick power. 20g (or so) would flow enough for about 350-400hp. with a large turbine you could control the boost more easily, and keep it from spooling constantly. personally... i would just get some headwork, cams, and good intake and exhaust
-
Please don't do straight pipes. You will actually lose HP/TQ. Do a good exhaust like Flowmaster and an air intake. Put a small hit of nitrous on it and you will be very happy. If it's an auto, do a converter.
I know there was a supercharged 3.8 around here at one point. Was actually pretty cool.
-
read through all of that....
-
For some more detailed info, try ls1.com. They have a section for the unfortunate V-6 F-body owners. A guy got 13's N/A out of his, at least on the internet. Here's a site that might help you out: http://www.firebirdv6.com/ . You can be almost as fast as the LS-1's.
-
out there wrote:
the turbo would be very easy and inexpensive for some quick power. 20g (or so) would flow enough for about 350-400hp. with a large turbine you could control the boost more easily, and keep it from spooling constantly. personally... i would just get some headwork, cams, and good intake and exhaust
thats all i did > out there wrote:
personally... i would just get some headwork, cams, and good intake and exhaust
got me from 255 to 295 for 700$ -
2wheeler wrote:
Please don't do straight pipes. You will actually lose HP/TQ. Do a good exhaust like Flowmaster and an air intake. Put a small hit of nitrous on it and you will be very happy. If it's an auto, do a converter.I know there was a supercharged 3.8 around here at one point. Was actually pretty cool.
His is a stick
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login