limits of walbro 255 pump, 600hp
-
And do you have dyno sheets to back up these claims? Or are you going off of some magical thought in your head?
-
Grr;166097 wrote:
. I know it sucks starting with a 150hp 4 cylinder and trying to make big power, but its just too easy with a 350+ci engine.
Garyand gets how many miles to the gallon.
look at his teg for instance. That car is pretty damn fast and its a 4 banger Ibet if he drove it as a DD(not sureif he does or not) but i bet he would get over twice the mileage you do and still go as fast at the track:icon_thumleft:
Matt
92 Civic HB
JDM d15b w/14b@8psi
-
krzydrftr93;166101 wrote:
and gets how many miles to the gallon.look at his teg for instance. That car is pretty damn fast and its a 4 banger Ibet if he drove it as a DD(not sureif he does or not) but i bet he would get over twice the mileage you do and still go as fast at the track:icon_thumleft:
Now hold on a minute. There are PLENTY of turbo V8 cars getting 25-30 mpg. Are you saying he is getting 50-60 mpg in his teg?
-
I don't even know my mpg, never cared. I laid down 540 whp like 2 years ago and drove it home from Sioux Falls @ 33 mpg and some change.
Now as far as fuel pumps, I made 560 whp on a walbro 255 on stock wiring w/ 720cc fuel injectors at a base pressure of 38 psi. Now, was that the pump that ran out or the injectors? My vote is the injectors.
The thing about PSI vs. HP is that on average at low boost a turbo is going to make a maximum of 10 hp per lb of boost. This number seems to hold true to most turbos on most setups. Figure at 8 psi this is another 80 hp. If he's making 520 hp on the motor I don't see it being a very friendly motor towards forced induction.
-
very true, it is dropping for sure, hell, the more i think about it, it might even be a walbro 307, thats a little weaker in the high psi ranges than a 340, but its been years since i bought the damn thing.
And magical thoughts? a 4l80E transmission has the ability to read input shaft torque, it isnt magic to turn a torque # into a HP number, every dyno in the world does it. And, there is no way to fudge the presented input torque, also the calculation is the same one used by every dyno produced, so if what the tranny in my car sees is magical, then i guess every dyno sheet is magical too. Look at any STS, rearmount system, on a stock car, say a LS1 camaro, dynos 320whp stock. STS on 8psi? if you cant get at least 420whp out of that, shoot yourself. thats a solid 100whp gain any day of the week, well a 100hp gain on my motor is AT LEAST 540 crank hp. Get a life.
On the other hand, there are so many turbo LS1 f-bodys and vettes that get over 20mpg, i wont even get into it.
Gary -
I beleive everyone was thinking you were refering to whp #'s, not crank.
FYI, I plan on making ~500 RWHP on a walbro 255 this year. It's not a standard walbro, it's a racetronix. I beleive it is modified to provide a higher fuel pressure. I firmly beleive I won't have any problem with making that (almost 600 crank).
-
krzydrftr93;166101 wrote:
and gets how many miles to the gallon.look at his teg for instance. That car is pretty damn fast and its a 4 banger Ibet if he drove it as a DD(not sureif he does or not) but i bet he would get over twice the mileage you do and still go as fast at the track:icon_thumleft:
i dont believe he made this thread to compair who gets better gas millage, it seems alright to me, as for you go buy a geo and be happy
-
So what is 540 crank HP to the wheels through a 4L80E slushbox? 90 hp less?
And I should probably shoot myself I've only made 311 HP per liter so far, and I am only on pace to make over 400 HP per liter this year. Man, imagine what us stupid 4 cylinder guys could do with 6 liters! Haha.
-
integra_gsr98;166113 wrote:
So what is 540 crank HP to the wheels through a 4L80E slushbox? 90 hp less?And I should probably shoot myself I've only made 311 HP per liter so far, and I am only on pace to make over 400 HP per liter this year. Man, imagine what us stupid 4 cylinder guys could do with 6 liters! Haha.
Remember gsr horsepower means nothing if you just sit at the rev limiter all the way down the track.... i can see it now no traction ever... but did you see my sweet 400hp per liter..OMGHI2OH
-
Grr:
- If I had rich parents that helped me mod my car, that would be sweet. I too wish I had rich parents.
- Rotarys could technically be treated as 2.6L motors due to their design.
Traction is difficult, but I guess we'll see what this year has in store. Chassis work is sweet.
-
Can anyone barrow me their rich parents for a year? Please?
Oh dang, guess I will have to just pay for it myself.
Also, I beleive, and correct me if I am wrong, nicks cars has clocked a faster 1/4 mile time, which really is the only thing that matters....
-
BTW, it is a walbro 307, that is sooooooo gay. Im actuall kinda pissed about it. On the buick board, they say 550hp with a 307, 640 hpwith a 340 i guess a nice new walbro 340 should be good for another 75hp than this shitty 307 with 40k miles on it. Damn it anyway.
-
i could give 2 flying shits about anyones times, i built this car for me, the way i wanted it. With no cage, and a assload of torque. BTW, logging the tourque input shows a sweet 600ft-lbs+ from 3500-4200, im gonna put so many miles on this bitch its gonna be sweet, and i wont put a bar in it anyway, so timeslips mean nothing
Gary
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login