issues boosting

[92TSIpos]

I have a 2g mas 550cc injectors, afcII, and afpr, i tried screwing with the afc a little bit, thought it might have been rich. I also have a narrow band air/fuel guage that i kinda monitor, and it seems that it is tuned pretty good as far as air fuel goes, but i think those things suck, I should get an lm1 and be done with it.

[out there]

lm1?
ok, let's get this all on the table... what's done to the car?

[92TSIpos]

I have a built bottom end with 1g big rods 2g pistons, .2 over bore, hks 272 cams
afcII, 550cc injectors, 14b turbo, sls intercooler piping, intake, 2g mas, k&n fipk, boost controller (spelling?), 2g exhuast manifold, full 3" exhuast with o2 eliminator, 255lph hp fuel pump, afpr, thats all i can think of right now. I think i found one of the boost leaks but it still sputters a little bit, and now I get bad boost spikes. I have it set at 10 pounds and it spikes to 20 pounds. got any ideas?

[King Ricer]

do you think that one of your boost leaks is coming from the boost controller?

[Guest]

i had the same problem with my old 7 bolt motor...and it got really screwed so i got a 6 bolt and it did almost the same thing...it would sputter...then take off and then boost up to 20+psi

[92TSIpos]

97Cav wrote:
do you think that one of your boost leaks is coming from the boost controller?

Yeah I did make some thing to check for boost leaks and the boost controller was one of them, then I had one between the turbo and j pipe, then I had one on the intake manifold. I fixed them all, the boost controller still leaks a little but at 50 psi, so it shouldnt be an issue.

[92TSIpos]

mwc1 wrote:
i had the same problem with my old 7 bolt motor...and it got really screwed so i got a 6 bolt and it did almost the same thing...it would sputter...then take off and then boost up to 20+psi

did you ever fix it, or is it still the same?

[out there]

92TSIpos wrote:
the boost controller still leaks a little but at 50 psi, so it shouldnt be an issue.

a leak is a leak

[Jim]

if it doesn't leak till 50psi then its not really an issue

intercooler pipes will blow off at high pressure like that too... but we don't boost that much so its not like it matters?

[Joel]

I think he was cocking off about his mad fatty hallman MBC...jk

[92TSIpos]

where should I have my bov vacuum hose connected to. Its on one of the throttle body connections right now, and I think its wrong but im not sure.

[SmitEvo]

Yep tap it off the Intake manifold. Also you could tap it off the J-pipe.. Have you done a compression check on your new engine? just wondering what you get!

Kevin
sls

[92TSIpos]

99slowGSX wrote:
Yep tap it off the Intake manifold. Also you could tap it off the J-pipe.. Have you done a compression check on your new engine? just wondering what you get!

Kevin
sls

I have a dejon tool j pipe and it doesnt have a tap on it, and no i havent gotten around to doing it yet. Do you have a tester at the shop?
Thanks for the help.

[btleier]

did you get this fixed yet?

[92TSIpos]

btleier wrote:
did you get this fixed yet?

yeah i fixed it. I had like 6 different leaks.

[SmitEvo]

we have a boost leak tester i can borrow out to ya ..

Kevin
sls

[92TSIpos]

99slowGSX wrote:
we have a boost leak tester i can borrow out to ya ..

Kevin
sls

I made a tester quick and found all my boost leaks, but if you have a compression tester that would be helpful.