New Stuff
-
Grr;285513 wrote:
not anymore, the new TC series is the best performing, best spooling turbo for the price on the market by leaps and bounds. This is basically a mini Y2K, uses the F1 turbine wheel which is and has been the best wheel on the market for a long time. Then it uses the standard (cheap) 76 or 78mm wheel in a t04 sized housing. Like zac said, full boost by 3-3400 and capable of 850whp, cant go wrong especially with the ease of packagingGood to know. I'm anxious to see how it does!
-
PSiedTSi;285508 wrote:
Why did you decide on Turbonetics? I've always heard/seen those as overpriced, underperforming turbos.yeah I dunno, I am not really familiar with turbonetics either.... I just did alot of research before buying and the TC's are the rave over in the LSX world.
I guess we will see
but to get a turbo like this with whatever turbine you want, whatever turbine housing you want, anodized compressor backing plate, and polished compressor housing all for $995 seems like a bargin to me
-
damn zac, this car is going to be fuckin sick!
-
You have all kinds of room in there. Axle meet turbo, junkyard meet axle.
> Mitch Hedberg wrote:
> I'm sick of following my dreams, I'm just going to find out where they are going and hook up with them later.ASE certified parts specialist.
2004 Impala LS 3.8 -
Parker;285566 wrote:
turbo looks sorta baby dick....big enough you that better get the N20 hooked up
beachbum_jon;285574 wrote:
damn zac, this car is going to be fuckin sick!just need to have the sound again, i miss it.... goes plenty good just NA, just need the sound
you better be working on yours!
fdfreak;285580 wrote:
do you have a manifold(s) made for it yet? VERY NICE!using the c6 corvette manifolds forward and down like they already are in the pics. All i need is to do is fab is a SS hotside from the manifolds to the turbo, and DP.... so not much
-
just need to have the sound again, i miss it.... goes plenty good just NA, just need the sound
you better be working on yours!
im more or less working on mine. if ordering parts and stuff counts as working on it. i cant really do much when i dont have an actual shell to work on, but that should change once i go home for harvest, there is one im going to look at and if its not a rust bucket i'll more that likely buy it and start ording more stuff from granny's
i cant wait to see what this car runs at the track, BA!
-
beachbum_jon;285625 wrote:
just need to have the sound again, i miss it.... goes plenty good just NA, just need the soundyou better be working on yours!
im more or less working on mine. if ordering parts and stuff counts as working on it. i cant really do much when i dont have an actual shell to work on, but that should change once i go home for harvest, there is one im going to look at and if its not a rust bucket i'll more that likely buy it and start ording more stuff from granny's
i cant wait to see what this car runs at the track, BA!
haha, ordering a bunch of stuff and having a nice big pile of parts is half the fun
hold out and get a good shell, it will be worth it
excited about mine, heck i am excited to see what you will do.... I really want to see someone do a bigger all motor lsx setup on one of these cars...
just knowing how this 6.0 acts, being only NA with only mild NA parts makes me curious to see what a a stroked HC ls2/ls3 variant with a really big cam/heads/intake would do in NA form on these cars...500-550rwhp would easy enough too achieve
it would be sick... get to it
-
zbrown;285648 wrote:
haha, ordering a bunch of stuff and having a nice big pile of parts is half the funhold out and get a good shell, it will be worth it
excited about mine, heck i am excited to see what you will do.... I really want to see someone do a bigger all motor lsx setup on one of these cars...
just knowing how this 6.0 acts, being only NA with only mild NA parts makes me curious to see what a a stroked HC ls2/ls3 variant with a really big cam/heads/intake would do in NA form on these cars...500-550rwhp would easy enough too achieve
it would be sick... get to it
maybe you will!
-
zbrown;285648 wrote:
haha, ordering a bunch of stuff and having a nice big pile of parts is half the funhold out and get a good shell, it will be worth it
excited about mine, heck i am excited to see what you will do.... I really want to see someone do a bigger all motor lsx setup on one of these cars...
just knowing how this 6.0 acts, being only NA with only mild NA parts makes me curious to see what a a stroked HC ls2/ls3 variant with a really big cam/heads/intake would do in NA form on these cars...500-550rwhp would easy enough too achieve
it would be sick... get to it
lol i know, i cant wait for the actual build to begin. 10.8:1 408 and some l92 heads to start with, maybe upgrade to some trick flows or afrs, we will see when it comes to it i guess.
i really want a white turbo 11 or gtu, but am looking for just about any nice rust free rolling shell with interior. i would prefer white but will take whatever as long as its not red.
but anyways enough about mine, what else you got for yours? FMIC? water/meth?
-
KA-T_240;285673 wrote:
maybe you will!now this is what i like to hear
beachbum_jon;285676 wrote:
lol i know, i cant wait for the actual build to begin. 10.8:1 408 and some l92 heads to start with, maybe upgrade to some trick flows or afrs, we will see when it comes to it i guess.i really want a white turbo 11 or gtu, but am looking for just about any nice rust free rolling shell with interior. i would prefer white but will take whatever as long as its not red.
but anyways enough about mine, what else you got for yours? FMIC? water/meth?
that def sounds like a plan to me, haha
I am not running any IC and my static CR is 10.2..... going to run on e85 and see what it will do
I am just not a fan of a2a IC's for some reason
hopefully under 10psi will get me to my goal and will work with e85, if not i have the meth system still on the car, haha
-
acquiring some more parts
plumbing stuff, and a ATI balancer. IT is only 5.5" instead of OEM 7.5" and doesn't have the AC pulley. They get enough money for those stupid things
It will give me a ton of room for the oil return on the turbo, since i am going to dump into the timing cover, plus i will need a SFI approved balancer
-
Nice! so you are not going to run ac? thats one of my goals, to keep ac and powersteering, ill just move the alt to the trunk if i need to..lol
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login