New Stuff
-
Chance91;293022 wrote:
That sounds like a good answer.Good luck raping rockets on the highway. That would be something to see. It would help to do a lot of aero work on the underside of the car for that.
You do realize that an fc has a CD of .30
and most modern rockets ~.60 (hummer H2 area)
here is a HACK JOB swap...... FB with a STOCK 5.3 with my same turbo on 11psi it ran a 9.93 @ 144.7.............. 3spd auto, 3.0 rear gear
my motor will obviously be stronger, but i am heavier and IRS
Him soft launch (1.74 60ft), 5psi in first, and 11psi in 2nd and 3rd
[ame]http://www.youtube.com/watch?v=m67VBf_wpcI[/ame] -
Should have tried out the new PTE WG, comes with 5 different springs....
-
inspector01;293856 wrote:
Should have tried out the new PTE WG, comes with 5 different springs....meh more money, and these should be enough... I'll bet the PTE a lot bigger physically like the Tial 44 too
and i have had good luck with Tial so
Alright got off of MW2 long enough to get something done
Hotside is done... now coat and wrap with the new DEI titanium stuff
any bets if I will be able to keep down to 4psi without creep?? asking because i didn't really know how i was going to place the WG's but this seem logcial to me... maybe not??
and i am lazy and didn't want to spend the time to TIG everything, and i am really good with MIG so i did that
I only TIG'd the SS v-bands and the WG flanges
I am a little rusty with TIG but not too bad
-
looks nice! so will the car be hitting the street/strip come spring?
-
My integra used to walk on rockets from a roll..... 550-600 hp and it's doable.
-
-
King Ricer;294184 wrote:
looks nice! so will the car be hitting the street/strip come spring?i dunno, need a rear end with gears first
integra_gsr98;294196 wrote:
My integra used to walk on rockets from a roll..... 550-600 hp and it's doable.what did your car weigh at that time?
KA-T_240;294227 wrote:
I saw vids of this...they still around??
-
zbrown;294234 wrote:
what did your car weigh at that time?2650 with driver i suppose.
-
integra_gsr98;294241 wrote:
2650 with driver i suppose.with you or tufte in it
-
haven't updated lately... got the hotside minus the DP done
everything is VHT and cured in an oven.... with the new DEI Titanium wrap.... shit is nice.... way nicer than anything else i have ever used, looks nice too
oh, and i picked up a rear setup, so no more grenaded rear ends
-
24valvenotak;294346 wrote:
with you or tufte in itme.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login