SRT4 vs Tiburon
-
I plan on it, and they have a level 10 TC waiting for me. That's some nice boost. I will post some dyno's also, just cause it's fun.
-
tjamz wrote:
it refers the stall rating on the TC (torque converter). Basically, it allows me to rev the motor higher before the torque converter "stalls" or locks up. For example, I was only able to rev my car to 2700 RPM while stopped and holding the brakes before my car wouldn't rev any higher/would push through the brakes. Now I can rev to about 4800 RPM therefore allowing me to make boost on launch.I have a stutter box
-
2k3WRXND wrote:
I have a stutter boxproblem is it will DESTROY my transmission, too many horror stories of 5spd WRX's going blitzo after UTECs ignition/fuel cut stutter box
-
Here is a video of the RIPP mod's Dyno at S3 Triple Crown this year.
-
do we know what kind of dyno that is? Meaning is it inertia or roller? Not bad numbers either way
-
I am not sure, but I can find out for you.
-
TIN and PSIed said that your car was slower than tins, and I am not just saying that, they said you ran like a harwood style 16.5+ or something at the track, higher than that I think. Let's just say, I slaughtered TIN from a roll, and it was pretty close from a dig. He told me not to tell anyone the outcome. Nah, it was close. I pretty much had him for a while, then he pulled later, but I would hope so, having 30 more hp than me from the factory. It was serioulsy not even close from a roll, but I suppose you guys are heavier and all. I am sure I will race you some day here and stop all of this nonsense, but not now, after what just happened, and having to pay $89 to nissan today, I am taking it easy.
-
They said it, not me, ask them. I thought you were noth 98s, did you get a newer one? I think you said something about that a while ago. Tjamz, it's a dynojet, roller.
-
We will soon. Hey Tjamz, have you dynoed yet?
-
yes, dynoed about 2 months ago. 283 WHP and 296 Torque. all this was @ 16.5 psi in a 94 degree shop on 92 octane. I'm still not fully tuned for racing, this was just to get my car running, not a performance tune at all. TXS is getting almost 100 WHP more than I am out of my setup...and running 11's. No worries though, I'll make the trip to Godspeed for the ultimate tune sometime this winter to get tuned by God himself... I should see low 12's high 11's by the end of next year HOPEFULLY.
-
tjamz wrote:
yes, dynoed about 2 months ago. 283 WHP and 296 Torque. all this was @ 16.5 psi in a 94 degree shop on 92 octane. I'm still not fully tuned for racing, this was just to get my car running, not a performance tune at all. TXS is getting almost 100 WHP more than I am out of my setup...and running 11's. No worries though, I'll make the trip to Godspeed for the ultimate tune sometime this winter to get tuned by God himself... I should see low 12's high 11's by the end of next year HOPEFULLY.amazed that you arent actually. I'll see you at the track in my Solara
P.S - No performance mods to the solara so dont think I'm doing anything to it.
-
GraveDigger wrote:
TIN and PSIed said that your car was slower than tins, and I am not just saying that, they said you ran like a harwood style 16.5+ or something at the track, higher than that I think. Let's just say, I slaughtered TIN from a roll, and it was pretty close from a dig. He told me not to tell anyone the outcome. Nah, it was close. I pretty much had him for a while, then he pulled later, but I would hope so, having 30 more hp than me from the factory. It was serioulsy not even close from a roll, but I suppose you guys are heavier and all. I am sure I will race you some day here and stop all of this nonsense, but not now, after what just happened, and having to pay $89 to nissan today, I am taking it easy.
the reason it wasnt close from a roll is that you started in a different gear than him... -
PSiedTSi wrote:
the reason it wasnt close from a roll is that you started in a different gear than him...Yeah, let's keep mocking my shiftronic.....pwned
-
2wheeler wrote:
Why have a 2 step if you don't race?
All utecs (v 3.1 and higher) came standard w/ launch control from the factory. Many of the guys utilizing it where experiencing problems w/ their cars after using it so I think that may be the reason that he's not. -
tjamz wrote:
All utecs (v 3.1 and higher) came standard w/ launch control from the factory. Many of the guys utilizing it where experiencing problems w/ their cars after using it so I think that may be the reason that he's not.Bingo
as for me not racing. Too many horror stories of people from Muscatell Subaru being at the tracks and denying warranty if they see you there. Considering my piston rings just got warranties I'm thankful I didn't as the labor cost would've been tremendous. I don't want to do aftermarket internals either since I am selling the car. -
GraveDigger wrote:
Yeah, let's keep mocking my shiftronic.....pwned
what are you talkin about? i wasnt mocking anything...i was simply stating that he started in a higher gear...pretty much every auto you can select the gear your in and shift when you want...and i dont really see how i was pwned or owned...either way
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login